>>>>>>>>>>>>>>>> running python 01-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 01-cal_Regional_ts.py [done with 2.60 secs.]
>>>>>>>>>>>>>>>> running python 02-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 02-cal_Regional_ts.py [done with 2.40 secs.]
>>>>>>>>>>>>>>>> running python 03-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 03-cal_Regional_ts.py [done with 1.89 secs.]
>>>>>>>>>>>>>>>> running python 04-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 04-cal_Regional_ts.py [done with 1.99 secs.]
>>>>>>>>>>>>>>>> running python 05-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 05-cal_Regional_ts.py [done with 1.93 secs.]
>>>>>>>>>>>>>>>> running python 06-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 06-cal_Regional_ts.py [done with 2.27 secs.]
>>>>>>>>>>>>>>>> running python 07-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 07-cal_Regional_ts.py [done with 2.21 secs.]
>>>>>>>>>>>>>>>> running sh -e 08-aggModelVar.sh
>>>>>>>>>>>>>>>> sh -e 08-aggModelVar.sh [done with 0.02 secs.]
>>>>>>>>>>>>>>>> running sh -e 09-aggModelVar.sh
>>>>>>>>>>>>>>>> sh -e 09-aggModelVar.sh [done with 0.02 secs.]
>>>>>>>>>>>>>>>> running sh -e 10-aggModelVar.sh
>>>>>>>>>>>>>>>> sh -e 10-aggModelVar.sh [done with 0.02 secs.]
>>>>>>>>>>>>>>>> running sh -e 11-aggModelVar.sh
>>>>>>>>>>>>>>>> sh -e 11-aggModelVar.sh [done with 0.03 secs.]
>>>>>>>>>>>>>>>> running sh -e 12-ensmean.sh
sst_ensmean.nc exist, skip.
>>>>>>>>>>>>>>>> sh -e 12-ensmean.sh [done with 0.00 secs.]
>>>>>>>>>>>>>>>> running sh -e 13-ensmean.sh
U850_ensmean.nc exist, skip.
>>>>>>>>>>>>>>>> sh -e 13-ensmean.sh [done with 0.04 secs.]
>>>>>>>>>>>>>>>> running sh -e 14-ensmean.sh
OMEGA500_ensmean.nc exist, skip.
>>>>>>>>>>>>>>>> sh -e 14-ensmean.sh [done with 0.00 secs.]
>>>>>>>>>>>>>>>> running sh -e 15-ensmean.sh
PRECT_ensmean.nc exist, skip.
>>>>>>>>>>>>>>>> sh -e 15-ensmean.sh [done with 0.00 secs.]
>>>>>>>>>>>>>>>> running sh -e 16-ensmean.sh
sst_ensmean.nc exist, skip.
>>>>>>>>>>>>>>>> sh -e 16-ensmean.sh [done with 0.00 secs.]
>>>>>>>>>>>>>>>> running sh -e 17-monthly2seasonal.sh
>>>>>>>>>>>>>>>> sh -e 17-monthly2seasonal.sh [done with 12.55 secs.]
>>>>>>>>>>>>>>>> running sh -e 18-monthly2seasonal.sh
>>>>>>>>>>>>>>>> sh -e 18-monthly2seasonal.sh [done with 5.54 secs.]
>>>>>>>>>>>>>>>> running sh -e 19-ensmean.sh
sst_ensmean_DJF.nc exist, skip.
>>>>>>>>>>>>>>>> sh -e 19-ensmean.sh [done with 0.00 secs.]
>>>>>>>>>>>>>>>> running sh -e 20-ensmean.sh
sst_ensmean_JJA.nc exist, skip.
>>>>>>>>>>>>>>>> sh -e 20-ensmean.sh [done with 0.00 secs.]
>>>>>>>>>>>>>>>> running python 21-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 21-cal_Regional_ts.py [done with 3.44 secs.]
>>>>>>>>>>>>>>>> running python 22-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 22-cal_Regional_ts.py [done with 3.44 secs.]
>>>>>>>>>>>>>>>> running python 23-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 23-cal_Regional_ts.py [done with 3.46 secs.]
>>>>>>>>>>>>>>>> running python 24-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 24-cal_Regional_ts.py [done with 3.62 secs.]
>>>>>>>>>>>>>>>> running python 25-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 25-cal_Regional_ts.py [done with 3.09 secs.]
>>>>>>>>>>>>>>>> running python 26-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 26-cal_Regional_ts.py [done with 3.05 secs.]
>>>>>>>>>>>>>>>> running python 27-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 27-cal_Regional_ts.py [done with 10.62 secs.]
>>>>>>>>>>>>>>>> running python 28-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 28-cal_Regional_ts.py [done with 9.64 secs.]
>>>>>>>>>>>>>>>> running python 29-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 29-cal_Regional_ts.py [done with 10.70 secs.]
>>>>>>>>>>>>>>>> running python 30-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 30-cal_Regional_ts.py [done with 9.20 secs.]
>>>>>>>>>>>>>>>> running python 31-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 31-cal_Regional_ts.py [done with 9.47 secs.]
>>>>>>>>>>>>>>>> running python 32-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 32-cal_Regional_ts.py [done with 8.78 secs.]
>>>>>>>>>>>>>>>> running python 33-cal_Regional_ts.py
>>>>>>>>>>>>>>>> python 33-cal_Regional_ts.py [done with 8.46 secs.]
>>>>>>>>>>>>>>>> running sh -e 34-ensmean.sh
sst_ensmean_Atl3_ts_JJA.nc exist, skip.
>>>>>>>>>>>>>>>> sh -e 34-ensmean.sh [done with 0.06 secs.]
>>>>>>>>>>>>>>>> running sh -e 35-combine_model_ts.sh
Concatenating to new dim: member
Concatenating from files:
sst_01_NINO3_ts.nc
sst_02_NINO3_ts.nc
sst_03_NINO3_ts.nc
sst_04_NINO3_ts.nc
sst_05_NINO3_ts.nc
Concatenating to file: sst_ens_NINO3_ts.nc
>>>>>>>>>>>>>>>> sh -e 35-combine_model_ts.sh [done with 0.32 secs.]
>>>>>>>>>>>>>>>> running sh -e 36-combine_model_ts.sh
Concatenating to new dim: member
Concatenating from files:
sst_01_NINO4_ts.nc
sst_02_NINO4_ts.nc
sst_03_NINO4_ts.nc
sst_04_NINO4_ts.nc
sst_05_NINO4_ts.nc
Concatenating to file: sst_ens_NINO4_ts.nc
>>>>>>>>>>>>>>>> sh -e 36-combine_model_ts.sh [done with 0.50 secs.]
>>>>>>>>>>>>>>>> running sh -e 37-combine_model_ts.sh
Concatenating to new dim: member
Concatenating from files:
sst_01_Atl3_ts.nc
sst_02_Atl3_ts.nc
sst_03_Atl3_ts.nc
sst_04_Atl3_ts.nc
sst_05_Atl3_ts.nc
Concatenating to file: sst_ens_Atl3_ts.nc
>>>>>>>>>>>>>>>> sh -e 37-combine_model_ts.sh [done with 0.40 secs.]
>>>>>>>>>>>>>>>> running sh -e 38-combine_model_ts.sh
Concatenating to new dim: member
Concatenating from files:
sst_01_NINO34_ts.nc
sst_02_NINO34_ts.nc
sst_03_NINO34_ts.nc
sst_04_NINO34_ts.nc
sst_05_NINO34_ts.nc
Concatenating to file: sst_ens_NINO34_ts.nc
>>>>>>>>>>>>>>>> sh -e 38-combine_model_ts.sh [done with 0.21 secs.]
>>>>>>>>>>>>>>>> running sh -e 39-combine_model_ts.sh
Concatenating to new dim: member
Concatenating from files:
sst_01_WTAtl_ts.nc
sst_02_WTAtl_ts.nc
sst_03_WTAtl_ts.nc
sst_04_WTAtl_ts.nc
sst_05_WTAtl_ts.nc
Concatenating to file: sst_ens_WTAtl_ts.nc
>>>>>>>>>>>>>>>> sh -e 39-combine_model_ts.sh [done with 0.18 secs.]
>>>>>>>>>>>>>>>> running sh -e 40-combine_model_ts.sh
Concatenating to new dim: member
Concatenating from files:
sst_01_TroWP_ts.nc
sst_02_TroWP_ts.nc
sst_03_TroWP_ts.nc
sst_04_TroWP_ts.nc
sst_05_TroWP_ts.nc
Concatenating to file: sst_ens_TroWP_ts.nc
>>>>>>>>>>>>>>>> sh -e 40-combine_model_ts.sh [done with 0.20 secs.]
>>>>>>>>>>>>>>>> running python 41-cal_Regional_ts.py
All output files exist, exit...
sst_ensmean_Atl3_ts_JJA.nc
>>>>>>>>>>>>>>>> python 41-cal_Regional_ts.py [done with 0.03 secs.]
>>>>>>>>>>>>>>>> running python 42-cal_Regional_ts.py
All output files exist, exit...
sst_ensmean_Atl3_ts_DJF.nc
>>>>>>>>>>>>>>>> python 42-cal_Regional_ts.py [done with 0.03 secs.]
>>>>>>>>>>>>>>>> running python 43-cal_Regional_ts.py
All output files exist, exit...
sst_ensmean_WTAtl_ts_JJA.nc
>>>>>>>>>>>>>>>> python 43-cal_Regional_ts.py [done with 0.02 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 44-plot_obs_model_ts.ncl
>>>>>>>>>>>>>>>> ncl -Q 44-plot_obs_model_ts.ncl [done with 0.68 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 45-plot_obs_model_ts.ncl
>>>>>>>>>>>>>>>> ncl -Q 45-plot_obs_model_ts.ncl [done with 0.53 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 46-plot_obs_model_ts.ncl
>>>>>>>>>>>>>>>> ncl -Q 46-plot_obs_model_ts.ncl [done with 0.50 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 47-plot_obs_model_ts.ncl
>>>>>>>>>>>>>>>> ncl -Q 47-plot_obs_model_ts.ncl [done with 0.50 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 48-plot_obs_model_ts.ncl
>>>>>>>>>>>>>>>> ncl -Q 48-plot_obs_model_ts.ncl [done with 0.60 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 49-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 49-plot_cache_cor.ncl [done with 3.20 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 50-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 50-plot_cache_cor.ncl [done with 3.82 secs.]
>>>>>>>>>>>>>>>> running sh -e 51-monthly2seasonal.sh
>>>>>>>>>>>>>>>> sh -e 51-monthly2seasonal.sh [done with 0.00 secs.]
>>>>>>>>>>>>>>>> running sh -e 52-monthly2seasonal.sh
>>>>>>>>>>>>>>>> sh -e 52-monthly2seasonal.sh [done with 0.00 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 53-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 53-plot_cache_cor.ncl [done with 1.57 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 54-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 54-plot_cache_cor.ncl [done with 1.54 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 55-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 55-plot_cache_cor.ncl [done with 1.18 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 56-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 56-plot_cache_cor.ncl [done with 1.23 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 57-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 57-plot_cache_cor.ncl [done with 1.33 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 58-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 58-plot_cache_cor.ncl [done with 1.15 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 59-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 59-plot_cache_cor.ncl [done with 1.57 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 60-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 60-plot_cache_cor.ncl [done with 1.50 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 61-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 61-plot_cache_cor.ncl [done with 1.35 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 62-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 62-plot_cache_cor.ncl [done with 1.26 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 63-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 63-plot_cache_cor.ncl [done with 1.52 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 64-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 64-plot_cache_cor.ncl [done with 1.22 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 65-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 65-plot_cache_cor.ncl [done with 1.40 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 66-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 66-plot_cache_cor.ncl [done with 1.25 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 67-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 67-plot_cache_cor.ncl [done with 3.84 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 68-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 68-plot_cache_cor.ncl [done with 3.56 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 69-plot_cache_cor.ncl
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_y_lat_coord: Warning: Data either does not contain
(0)	a valid latitude coordinate array or doesn't contain one at all.
(0)	A valid latitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	check_for_lon_coord: Warning: Data either does not contain
(0)	a valid longitude coordinate array or doesn't contain one at all.
(0)	A valid longitude coordinate array should have a 'units'
(0)	attribute equal to one of the following values: 
(0)	    'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'
(0)	is_valid_latlon2d_attr: Warning: The 'lon2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
(0)	is_valid_latlon2d_attr: Warning: The 'lat2d' attribute must either be
(0)	the same dimension sizes as the data, or one element larger in both directions.
(0)	Your data will most likely not be overlaid on the map correctly.
warning:ContourPlotDraw: out of range coordinates encountered; standard AreaFill rendering method may be unreliable;
 consider setting the resource trGridType to "TriangularMesh" if coordinates contain missing values

>>>>>>>>>>>>>>>> ncl -Q 69-plot_cache_cor.ncl [done with 3.49 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 70-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 70-plot_obs_model_lagcor.ncl [done with 0.62 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 71-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 71-plot_obs_model_lagcor.ncl [done with 0.57 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 72-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 72-plot_obs_model_lagcor.ncl [done with 0.55 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 73-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 73-plot_obs_model_lagcor.ncl [done with 0.77 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 74-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 74-plot_obs_model_lagcor.ncl [done with 0.62 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 75-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 75-plot_obs_model_lagcor.ncl [done with 0.58 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 76-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 76-plot_obs_model_lagcor.ncl [done with 0.51 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 77-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 77-plot_obs_model_lagcor.ncl [done with 0.71 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 78-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 78-plot_obs_model_lagcor.ncl [done with 0.60 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 79-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 79-plot_obs_model_lagcor.ncl [done with 0.51 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 80-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 80-plot_obs_model_lagcor.ncl [done with 0.60 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 81-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 81-plot_obs_model_lagcor.ncl [done with 0.49 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 82-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 82-plot_obs_model_lagcor.ncl [done with 0.69 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 83-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 83-plot_obs_model_lagcor.ncl [done with 0.53 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 84-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 84-plot_obs_model_lagcor.ncl [done with 0.54 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 85-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 85-plot_obs_model_lagcor.ncl [done with 0.45 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 86-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 86-plot_obs_model_lagcor.ncl [done with 0.60 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 87-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 87-plot_obs_model_lagcor.ncl [done with 0.57 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 88-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 88-plot_obs_model_lagcor.ncl [done with 0.73 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 89-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 89-plot_obs_model_lagcor.ncl [done with 0.50 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 90-plot_obs_model_lagcor.ncl
>>>>>>>>>>>>>>>> ncl -Q 90-plot_obs_model_lagcor.ncl [done with 0.50 secs.]
>>>>>>>>>>>>>>>> running sh -e 91-monthly2seasonal.sh
>>>>>>>>>>>>>>>> sh -e 91-monthly2seasonal.sh [done with 0.51 secs.]
>>>>>>>>>>>>>>>> running sh -e 92-monthly2seasonal.sh
>>>>>>>>>>>>>>>> sh -e 92-monthly2seasonal.sh [done with 0.29 secs.]
>>>>>>>>>>>>>>>> running sh -e 93-monthly2seasonal.sh
>>>>>>>>>>>>>>>> sh -e 93-monthly2seasonal.sh [done with 0.40 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 94-plot_cache_cor.ncl
warning:Attempt to reference attribute (_FillValue) which is undefined

>>>>>>>>>>>>>>>> ncl -Q 94-plot_cache_cor.ncl [done with 0.71 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 95-plot_cache_cor.ncl
warning:Attempt to reference attribute (_FillValue) which is undefined

>>>>>>>>>>>>>>>> ncl -Q 95-plot_cache_cor.ncl [done with 0.62 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 96-plot_cache_cor.ncl
warning:Attempt to reference attribute (_FillValue) which is undefined

>>>>>>>>>>>>>>>> ncl -Q 96-plot_cache_cor.ncl [done with 0.99 secs.]
>>>>>>>>>>>>>>>> running ncl -Q 97-plot_cache_cor.ncl
warning:Attempt to reference attribute (_FillValue) which is undefined

>>>>>>>>>>>>>>>> ncl -Q 97-plot_cache_cor.ncl [done with 0.68 secs.]
>>>>>>>>>>>>>>>> running sh -e 98-mk_html_page_2.sh
>>>>>>>>>>>>>>>> sh -e 98-mk_html_page_2.sh [done with 67.29 secs.]